|
UTV: Polaris Ranger XP, HD, HO, Crew, Diesel, 6x6, EV, 400, 500, 700, 800, 900, RZR, RZR 570, RZR-S, RZR-4, RZR 900 XP, RZR 900 XP-4, Yamaha Rhino
Can-Am Commander, Maverick, Maverick-4, Honda Big Red MUV, Kawasaki Mule, Teryx, Teryx-4, Arctic Cat Prowler, Wildcat, Wildcat-4, Coleman Outfitter, Bobcat
ATV: Poilaris Sportsman, Magnum, Hawkeye, Trail Boss, Yamaha Grizzly, Kodiak, Honda Rancher, Foreman, Rubicon, Rincon, Four Trax, Recon
Kawasaki Brute Force, Bayou, Prairie, Can-Am Outlander, Suzuki King Quad, Vinson, Eiger, Arctic Cat MudPro, 350, 450, 550, 650, 700, 1000
|
|
|
|
|
|
|
"The Original Design and Developer of the LED Turn Signal Kit for UTV's"
and
"The Original Design and Developer of the LED Turn Signal Kit with Emergency Flashers for ATV's"
|
|
|
|
|
Hello and Welcome to
EZ Turn Signal Kits & Accessories
|
|
|
|
|
Read about our turn signal switch (TSS) and different mounting hardware
used in our UTV aftermarket turn signal kits.
|
|
|
Our Turn Signal Switch is heavy duty, has the right and left turn signals along with a pull out flare tab for the 4-way emergency (hazard warning) flashers and has an indicator (pilot) light showing the turn signal or emergency flashers are activated.
|
|
|
We developed a custom turn signal switch (TSS) mounting strap for the 2009-2010 Polaris Ranger 500, the 2009-2013 Polaris Ranger 700/800/900 XP & HD & HO, the 2010-2013 Polaris Ranger 800 Crew & 6x6, and the 2011-2013 Polaris Ranger Diesel models. This professional looking mount will allow full range of motion and clearance for the tilt steering wheel.
|
|
|
We developed a custom turn signal switch (TSS) mounting plate for the 2010-2013 Polaris Ranger Mid-size EV & 400 and the 2011-2013 Polaris Ranger Mid-size 500 & 500 Crew and the 2013 Polaris Ranger Mid-size 800 models. This professional looking black powder coated plate looks and works great on the Mid-size Ranger's.
|
|
|
We developed a custom turn signal switch (TSS) mounting bracket for the 2011-2013 Can-Am Commander and the 2013 Can-Am Maverick. This professional looking black powder coated bracket is very EZ to install and it works great on the Can-Am Commander's and Maverick's.
|
|
|
We developed a custom turn signal switch (TSS) mounting bracket for the 2009-2013 Honda Big Red MUV. This professional looking black powder coated bracket looks and works great on the Honda MUV's.
|
|
|
Some UTV’s / ATV's have limited space for a full size turn signal switch and some just like the toggle type switches mounted on the dash. So, we developed a Rocker Switch (waterproof) LED turn signal kit that gives you the indicator lights built in and the 4-way emergency flashers.
|
|
|
We have seen several turn signal switches out there that come with a hose clamp, not this company. You will always get good looking and high quality aftermarket turn signal kits from EZ Turn Signal Kits & Accessories!
|
|
Check out our entire stock of aftermarket turn signal kits & accessories and if you have any questions, please contact us, we are here to help you!
|
|
|
|
|
|
Polaris Ranger Club (PRC), Randy's video of the EZ Turn Signal Kit (stock# 104) installed on his 2013 Polaris Ranger 900 XP.
|
|
|
|
|
|
|
|
The SM LED Turn Signal Kit will fit all years for the Polaris RZR, RZR 570, RZRS, RZR4, RZR XP 900, RZR XP-4 900, Ranger XP, HD, HO, Crew, Diesel, 6x6, EV, 400, 500, 700, 800 & 900 models, all years for the Yamaha Rhino 700, 660 & 450 models, all years for the Can-Am Commander / Maverick 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, all years for the Arctic Cat Prowler and Wildcat models, all years for the Coleman Outfitter models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), Golf Cart, Sand Car, etc.
Note: some like to customize their UTV with Double or Triple lights, order from the drop down box (BELOW) a) Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
Note: some like amber lights front and rear, order from the drop down box (BELOW) a) Light Options: Amber Kit: All 4 Amber lights or Double Lights All Amber: 8 Amber lights or Triple Lights All Amber: 12 Amber lights.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models... 2008-2013 RZR's all models... 2008-2009 Ranger 700 Crew's... 2004-2013 Yamaha Rhino's all models... 2000-2013 Kawasaki Mule's all models... 2008 Kawasaki Teryx... 2005-2007 Arctic Cat Prowler 550 & 650... 2009-2013 Prowler 1000... 2012-2013 Wildcat... 2012-2013 Coleman Outfitter all models... Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2013 Ranger 700/800/900 XP & HD & HO, the 2010-2013 Ranger 800 Crew & 6x6, and the 2011-2013 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap .. or .. 2009 Ranger 700 XP & HD (TSS) Strap .. or .. 10-13 Ranger 800 XP-HD-HO (TSS) Strap .. or .. 2013 Ranger 900 XP (TSS) Strap .. or .. 10-13 Ranger 800 Crew (TSS) Strap .. or .. 10-13 Ranger 800 6x6 (TSS) Strap .. or .. 11-13 Ranger Diesel (TSS) Strap .. or .. 2013 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2013 Polaris Ranger Mid-size EV & 400 and the 2011-13 Ranger Mid-size 500 & 500 Crew and the 2013 Ranger Mid-size 800 use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-13 Ranger Mid-size EV/400 (TSS) Plate .. or .. 11-13 Ranger Mid-size 500 (TSS) Plate .. or .. 11-13 Ranger 500 Crew (TSS) Plate .. or .. 2013 Ranger Mid-size 800 (TSS) Plate.
Note: the 2011-2013 Can-Am Commander and the 2013 Can-Am Maverick use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-13 Can-Am Commander (TSS) Bracket .. or .. 2013 Can-Am Maverick (TSS) Bracket.
Note: the 2009-2013 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-13 Honda BR MUV (TSS) Bracket.
Note: the 2008-2013 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2013 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt Surface Mount LED Turn Signal Kit with 2 Surface Mounted ¾” inch Amber (front) and 2 Surface Mounted ¾” inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The SM LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The 4 Surface Mounted LED super bright lights are ¾” inch round with an attached rubber grommet for quick mounting. They are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required). These SM LED’s are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.
The Special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The kit includes: 2 Amber and 2 Red SM LED super bright lights with grommets, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This aftermarket turn signal kit can be easily installed, you don’t need any brackets for mounting lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This kit was originally developed for the Polaris RZR, RZRS, RZR4, RZR 570, RZR XP 900, RZR XP-4 900, Ranger Mid-size EV, 400, 500 and 800. My customers have installed their kits on the Polaris Ranger EV, 400, 500, 500 Crew, 700, 800, 900, XP, HD, HO, Diesel, 6x6, RZR, RZR 570, RZR-S, RZR-4, RZR XP 900, RZR XP-4 900 & 800 Crew models, the Yamaha Rhino, the Can-Am Commander & Maverick models, the Honda Big Red MUV, the Kawasaki Mule & Teryx models, the Arctic Cat Prowler and Wildcat. This aftermarket turn signal kit can be easily installed on any 12 volt Side-by-Side UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .20 amps - that's less than a quarter of an amp with the four hazard lights on!
|
|
|
|
|
|
Polaris Ranger Club (PRC), Randy's video of the EZ Turn Signal Kit (stock# 104) installed on his 2013 Polaris Ranger 900 XP.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 – Amber SM LED Super Bright Lights
2 – Red SM LED Super Bright Lights
1 - Turn Signal Switch w/hardware
|
|
1 - LED Flasher
1 - ATC Fuse Holder
1 - ATC 3 Amp Fuse
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
- Option: Double or Triple Lights for a custom look!
- Option: Turn Signal Switch (TSS) mounting hardware for your particular year, make and model UTV.
- Option: Wire and Connector Kit, this kit will make it easy to connect your turn signals.
|
|
|
|
 
|
|
|
|
|
|
Rocker Switches SM LED ATV Turn Signal Kit
|
|
|
|
|
Some UTV’s / ATV's have limited space for a full size turn signal switch and some just like the toggle type switches mounted on the dash. So, we developed a Rocker Switch (waterproof) LED turn signal kit that gives you the indicator lights built in and the 4-way emergency flashers.
|
|
The Rocker Switches SM LED ATV Turn Signal Kit will fit the Polaris Sportsman, Magnum, Hawkeye, Trail Boss, the Yamaha Grizzly, Kodiak, the Kawasaki Brute Force, Bayou, Prairie, the Can-Am Outlander, the Honda Rancher, Foreman, Rubicon, Rincon, Four Trax, Recon, the Suzuki King Quad, Vinson, Eiger and the Arctic Cat MudPro, 350, 450, 550, 650, 700, 1000, Diesel and Thunder Cat. (SEE NOTES BELOW) This kit can be easily installed on any ATV, UTV, (side x side), Golf Cart, Sand Car, etc.
Note: some like to customize their turn signal kit with Double or Triple lights, order from the drop down box (BELOW) a) Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
Note: some like amber lights front and rear, order from the drop down box (BELOW) a) Light Options: Amber Kit: All 4 Amber lights or Double Lights All Amber: 8 Amber lights or Triple Lights All Amber: 12 Amber lights.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt Rocker Switch SM LED ATV Turn Signal Kit with 2 Surface Mounted ¾” inch Amber (front) and 2 Surface Mounted ¾” inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The SM LED ATV turn signal kit comes with two rocker switches with LED indicator (green) lights for the turn signals and 4-way emergency flashers (hazard warning).
The 4 SM LED super bright lights are ¾” inch round with an attached rubber grommet for quick mounting. They are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required). These SM LED’s are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.
The Special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The kit includes: 2 Amber and 2 Red SM LED super bright lights with grommets, the 2 Rocker Switches with LED indicator (green) lights for the turn signals and 4-way emergency flashers, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, you don’t need any brackets for mounting the switches or lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This kit was originally developed for ATV’s. My customers have installed their kits on the Polaris Sportsman, Magnum, Hawkeye, Trail Boss, RZR, RZRS, RZR4, RZR 570, RZR 900 XP & XP-4, the Yamaha Grizzly, Kodiak, the Kawasaki Brute Force, Bayou, Prairie, Teryx, the Can-Am Outlander, the Honda Rancher, Foreman, Rubicon, Rincon, FourTrax, Recon, the Suzuki KingQuad, Vinson, Eiger and the Arctic Cat MudPro, Prowler HDX, 350, 450, 550, 650, 700, 1000, Diesel, ThunderCat and WildCat. This kit can be easily installed on any 12 volt ATV, UTV, Side-by-Side, Golf Cart, Club Car, Sand Car, Dune Buggy, etc.
The turn signal rocker switches are very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for their added safety.
|
|
|
Total Power Draw: .20 amps - that's less than a quarter of an amp with the four hazard lights on!
|
|
|
|
|
|
|
|
|
|
|
|
2 – Amber SM LED Super Bright Lights
2 – Red SM LED Super Bright Lights
2 - LED Rocker Switches (green)
|
|
1 - LED Flasher
1 - ATC Fuse Holder
1 - ATC 3 Amp Fuse
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
- Option: Double or Triple Lights for a custom look!
- Option: Wire and Connector Kit, this kit will make it easy to connect your turn signals.
|
|
|
|
|
|
|
|
|
|
|
SM LED Parking Lights & Turn Signal Kit
|
|
|
|
The SM LED Parking Lights & Turn Signal Kit will fit all years for the Polaris RZR, RZR 570, RZRS, RZR4, RZR XP 900, RZR XP-4 900, Ranger XP, HD, HO, Crew, Diesel, 6x6, EV, 400, 500, 700, 800 & 900 models, all years for the Yamaha Rhino 700, 660 & 450 models, all years for the Can-Am Commander / Maverick 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, all years for the Arctic Cat Prowler and Wildcat models, all years for the Coleman Outfitter models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), Golf Cart, Sand Car, etc.
Note: some like to customize their UTV with Double or Triple lights, order from the drop down box (BELOW) a) Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models... 2008-2013 RZR's all models... 2008-2009 Ranger 700 Crew's... 2004-2013 Yamaha Rhino's all models... 2000-2013 Kawasaki Mule's all models... 2008 Kawasaki Teryx... 2005-2007 Arctic Cat Prowler 550 & 650... 2009-2013 Prowler 1000... 2012-2013 Wildcat... 2012-2013 Coleman Outfitter all models... Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2013 Ranger 700/800/900 XP & HD & HO, the 2010-2013 Ranger 800 Crew & 6x6, and the 2011-2013 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap .. or .. 2009 Ranger 700 XP & HD (TSS) Strap .. or .. 10-13 Ranger 800 XP-HD-HO (TSS) Strap .. or .. 2013 Ranger 900 XP (TSS) Strap .. or .. 10-13 Ranger 800 Crew (TSS) Strap .. or .. 10-13 Ranger 800 6x6 (TSS) Strap .. or .. 11-13 Ranger Diesel (TSS) Strap .. or .. 2013 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2013 Polaris Ranger Mid-size EV & 400 and the 2011-13 Ranger Mid-size 500 & 500 Crew and the 2013 Ranger Mid-size 800 use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-13 Ranger Mid-size EV/400 (TSS) Plate .. or .. 11-13 Ranger Mid-size 500 (TSS) Plate .. or .. 11-13 Ranger 500 Crew (TSS) Plate .. or .. 2013 Ranger Mid-size 800 (TSS) Plate.
Note: the 2011-2013 Can-Am Commander and the 2013 Can-Am Maverick use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-13 Can-Am Commander (TSS) Bracket .. or .. 2013 Can-Am Maverick (TSS) Bracket.
Note: the 2009-2013 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-13 Honda BR MUV (TSS) Bracket.
Note: the 2008-2013 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2013 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt Surface Mount LED Parking Lights & Turn Signal Kit with 2 Surface Mounted ¾” inch Amber (front) and 2 Surface Mounted ¾” inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The SM LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four Surface Mounted LED Dual Mode super bright lights are ¾” inch round with an attached rubber grommet for quick mounting. They are surface mounted LED's with a slim-line design for mounting in small spaces (no brackets required). These SM LED’s are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The kit includes: 2 Amber and 2 Red SM LED Dual Mode super bright lights with grommets, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, you don’t need any brackets for mounting lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This kit was developed for the Polaris RZR, RZR-S, RZR-4, RZR 570, RZR XP 900, RZR XP-4 900, the 10-13 Polaris Ranger Mid-size EV & 400, the 11-13 Ranger Mid-size 500 & 500 Crew and the 2013 Ranger Mid-size 800 models. My customers have installed their kits on the Polaris Ranger EV, 400, 500, 500 Crew, 700, 800, 900, XP, HD, HO, Diesel, 6x6, RZR, RZR 570, RZR-S, RZR-4, RZR XP 900, RZR XP-4 900 & 800 Crew models, the Yamaha Rhino, the Can-Am Commander & Maverick models, the Honda Big Red MUV, the Kawasaki Mule & Teryx models, the Arctic Cat Prowler & Wildcat models. This kit can be easily installed on any 12 volt Side-by-Side UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .160 amps - that's less than a 6th of an amp with the four hazard lights on!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 – Amber SM LED Dual Mode Lights
2 – Red SM LED Dual Mode Lights
1 - Turn Signal Switch w/hardware
|
|
1 - LED Flasher
1 - ATC Fuse Holder
1 - ATC 3 Amp Fuse
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
- Option: Double or Triple Lights for a custom look!
- Option: Turn Signal Switch (TSS) mounting hardware for your particular year, make and model UTV.
- Option: Wire and Connector Kit, this kit will make it easy to connect your turn signals.
|
|
|
|
|
|
|
|
|
The LED Turn Signal Kit will fit all years for the Polaris Ranger XP / HD / HO / EV / Diesel / 6x6 / TM / 400 / 425 / 500 / 700 / 800 / 900 / RZR / RZRS / RZR4 / RZR 570 / RZR XP 900 / RZR XP-4 900 and Crew models, all years for the Yamaha Rhino 700 / 660 & 450 models, all years for the Can-Am Commander / Maverick 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, and all years for the Arctic Cat Prowler models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), UTV, Golf Cart, Sand Car, Dune Buggy, etc.
Note: some like amber lights front and rear, order from the drop down box (BELOW) a) Light Options: Amber Kit: All 4 Amber lights.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models... 2008-2013 RZR's all models... 2008-2009 Ranger 700 Crew's... 2004-2013 Yamaha Rhino's all models... 2000-2013 Kawasaki Mule's all models... 2008 Kawasaki Teryx... 2005-2007 Arctic Cat Prowler 550 & 650... 2009-2013 Prowler 1000... 2012-2013 Wildcat... 2012-2013 Coleman Outfitter all models... Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2013 Ranger 700/800/900 XP & HD & HO, the 2010-2013 Ranger 800 Crew & 6x6, and the 2011-2013 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap .. or .. 2009 Ranger 700 XP & HD (TSS) Strap .. or .. 10-13 Ranger 800 XP-HD-HO (TSS) Strap .. or .. 2013 Ranger 900 XP (TSS) Strap .. or .. 10-13 Ranger 800 Crew (TSS) Strap .. or .. 10-13 Ranger 800 6x6 (TSS) Strap .. or .. 11-13 Ranger Diesel (TSS) Strap .. or .. 2013 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2013 Polaris Ranger Mid-size EV & 400 and the 2011-13 Ranger Mid-size 500 & 500 Crew and the 2013 Ranger Mid-size 800 use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-13 Ranger Mid-size EV/400 (TSS) Plate .. or .. 11-13 Ranger Mid-size 500 (TSS) Plate .. or .. 11-13 Ranger 500 Crew (TSS) Plate .. or .. 2013 Ranger Mid-size 800 (TSS) Plate.
Note: the 2011-2013 Can-Am Commander and the 2013 Can-Am Maverick use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-13 Can-Am Commander (TSS) Bracket .. or .. 2013 Can-Am Maverick (TSS) Bracket.
Note: the 2009-2013 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-13 Honda BR MUV (TSS) Bracket.
Note: the 2008-2013 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2013 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt LED Turn Signal Kit with 2 Amber (front) and 2 Red (rear) DOT approved LED lights. The 4 LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four LED Lights are 4”x 2” rectangular with 16 (LED) Light Emitting Diodes each, polycarbonate lens & housing and hard wired with encapsulated electronics to eliminate corrosion.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The kit includes: 2 Amber and 2 Red DOT approved LED lights, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher, an in-line fuse holder, a 3 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This aftermarket turn signal kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This kit was originally developed for my 2006 Polaris Ranger XP and my customers have installed their kits on the Polaris Ranger 425 / TM / 400 / 500 / 700 / 800 / 900 / XP / HD / HO / Diesel / 6x6, Razor (RZR, RZR 570, RZRS, RZR4, RZR XP 900, RZR XP-4 900) and Crew models, the Yamaha Rhino, the Can-Am Commander and Maverick models, the Honda Big Red MUV, the Kawasaki Mule and Teryx models, and the Arctic Cat Prowler. This aftermarket turn signal kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .32 amps - that's less than a third of an amp with the four hazard lights on!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 - Amber 4" x 2" LED Lights
2 - Red 4" x 2" LED Lights
1 - Turn Signal Switch w/hardware
|
|
1 - LED Flasher
1 - ATC Fuse Holder
1 - ATC 3 Amp Fuse
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
|
|
|
|
|
|
LED Parking Lights
& Turn Signal Kit
|
|
|
|
|
The LED Parking Lights & Turn Signal Kit will fit all years for the Polaris Ranger XP / HD / HO / EV / Diesel / 6x6 / TM / 400 / 425 / 500 / 700 / 800 / 900 / RZR / RZRS / RZR4 / RZR 570 / RZR XP 900 / RZR XP-4 900 and Crew models, all years for the Yamaha Rhino 700 / 660 & 450 models, all years for the Can-Am Commander / Maverick 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, and all years for the Arctic Cat Prowler models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), UTV, Golf Cart, Sand Car, Dune Buggy, etc.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models... 2008-2013 RZR's all models... 2008-2009 Ranger 700 Crew's... 2004-2013 Yamaha Rhino's all models... 2000-2013 Kawasaki Mule's all models... 2008 Kawasaki Teryx... 2005-2007 Arctic Cat Prowler 550 & 650... 2009-2013 Prowler 1000... 2012-2013 Wildcat... 2012-2013 Coleman Outfitter all models... Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2013 Ranger 700/800/900 XP & HD & HO, the 2010-2013 Ranger 800 Crew & 6x6, and the 2011-2013 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap .. or .. 2009 Ranger 700 XP & HD (TSS) Strap .. or .. 10-13 Ranger 800 XP-HD-HO (TSS) Strap .. or .. 2013 Ranger 900 XP (TSS) Strap .. or .. 10-13 Ranger 800 Crew (TSS) Strap .. or .. 10-13 Ranger 800 6x6 (TSS) Strap .. or .. 11-13 Ranger Diesel (TSS) Strap .. or .. 2013 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2013 Polaris Ranger Mid-size EV & 400 and the 2011-13 Ranger Mid-size 500 & 500 Crew and the 2013 Ranger Mid-size 800 use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-13 Ranger Mid-size EV/400 (TSS) Plate .. or .. 11-13 Ranger Mid-size 500 (TSS) Plate .. or .. 11-13 Ranger 500 Crew (TSS) Plate .. or .. 2013 Ranger Mid-size 800 (TSS) Plate.
Note: the 2011-2013 Can-Am Commander and the 2013 Can-Am Maverick use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-13 Can-Am Commander (TSS) Bracket .. or .. 2013 Can-Am Maverick (TSS) Bracket.
Note: the 2009-2013 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-13 Honda BR MUV (TSS) Bracket.
Note: the 2008-2013 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2013 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt LED Parking Lights and Turn Signal Kit with 2 Amber (front) and 2 Red (rear) Dual Mode DOT approved LED lights. The 4 Dual Mode LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four Dual Mode LED Lights are 4”x 2” rectangular with 12 Colored (red or amber) Light Emitting Diodes each. They are chrome based, come with both clear & colored lenses and are hard wired with encapsulated electronics to eliminate corrosion. They have 3 wires each, one for ground, normal mode (parking lights) and high mode (turn signals), which is equal to 24 LED’s on high mode.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The Parking Light Switch is a LED illuminated rocker switch and is easy to install, vibration resistance, and will illuminate when turned on.
The kit includes: 2 Amber and 2 Red Dual Mode DOT approved LED lights with both colored and clear lenses, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher, the LED illuminated rocker switch for parking lights, an in-line fuse holder, a 3 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This aftermarket turn signal kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This kit was originally developed for my 2009 Polaris Ranger XP and my customers have installed their kits on the Polaris Ranger 425 / TM / 400 / 500 / 700 / 800 / 900 / XP / HD / HO / Diesel / 6x6, Razor (RZR, RZR 570, RZRS, RZR4, RZR XP 900, RZR XP-4 900) and Crew models, the Yamaha Rhino, the Can-Am Commander and Maverick models, the Honda Big Red MUV, the Kawasaki Mule and Teryx models, and the Arctic Cat Prowler. This aftermarket turn signal kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .84 amps - that's less than an amp with the four parking and hazard lights on!
|
|
|
<<< hold mouse over pictures to see other examples >>>
|
|
|
|
|
|
|
|
|
|
|
2 - Amber 4"x2" DM LED Lights
2 - Red 4"x2" DM LED Lights
1 - Turn Signal Switch w/hardware
|
|
1 - LED Flasher
1 - Fuse Holder & Fuse
1 - LED Rocker Switch
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
|
|
|
|
|
|
|
|
Regular Bulb Turn Signal Kit
|
|
|
|
The Regular Bulb Turn Signal Kit will fit all years for the Polaris Ranger XP / HD / HO / Diesel / 6x6 / TM / 400 / 425 / 500 / 700 / 800 / 900 / RZR / RZRS / RZR4 / RZR XP 900 / RZR XP-4 900 and Crew models, all years for the Yamaha Rhino 700 / 660 & 450 models, all years for the Can-Am Commander / Maverick 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, and all years for the Arctic Cat Prowler models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), UTV, Golf Cart, Sand Car, Dune Buggy, etc.
Note: some like amber lights front and rear, order from the drop down box (BELOW) a) Light Options: Amber Kit: All 4 Amber lights.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models... 2008-2013 RZR's all models... 2008-2009 Ranger 700 Crew's... 2004-2013 Yamaha Rhino's all models... 2000-2013 Kawasaki Mule's all models... 2008 Kawasaki Teryx... 2005-2007 Arctic Cat Prowler 550 & 650... 2009-2013 Prowler 1000... 2012-2013 Wildcat... 2012-2013 Coleman Outfitter all models... Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2013 Ranger 700/800/900 XP & HD & HO, the 2010-2013 Ranger 800 Crew & 6x6, and the 2011-2013 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap .. or .. 2009 Ranger 700 XP & HD (TSS) Strap .. or .. 10-13 Ranger 800 XP-HD-HO (TSS) Strap .. or .. 2013 Ranger 900 XP (TSS) Strap .. or .. 10-13 Ranger 800 Crew (TSS) Strap .. or .. 10-13 Ranger 800 6x6 (TSS) Strap .. or .. 11-13 Ranger Diesel (TSS) Strap .. or .. 2013 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2013 Polaris Ranger Mid-size EV & 400 and the 2011-13 Ranger Mid-size 500 & 500 Crew and the 2013 Ranger Mid-size 800 use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-13 Ranger Mid-size EV/400 (TSS) Plate .. or .. 11-13 Ranger Mid-size 500 (TSS) Plate .. or .. 11-13 Ranger 500 Crew (TSS) Plate .. or .. 2013 Ranger Mid-size 800 (TSS) Plate.
Note: the 2011-2013 Can-Am Commander and the 2013 Can-Am Maverick use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-13 Can-Am Commander (TSS) Bracket .. or .. 2013 Can-Am Maverick (TSS) Bracket.
Note: the 2009-2013 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-13 Honda BR MUV (TSS) Bracket.
Note: the 2008-2013 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2013 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt Regular Bulb Turn Signal Kit with 2 Amber (front) and 2 Red (rear) DOT approved Regular Bulb lights. The 4 Regular Bulb light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four Regular Bulb Lights are 4”x 2” rectangular with (2) bulbs each, they have two stainless steel grounds, corrosion-resistant contacts, lubricated fleet service bulbs, corrosion-proof body; they come with 4 extra ground wires and 8 self tapping screws for mounting.
The Bulb Flasher has the 3 pin connections for LOAD, PILOT and POWER. This flasher comes with a clamp and a self tapping screw for mounting.
The kit includes: 2 Amber and 2 Red DOT approved Regular Bulb lights, 4 ground wires with ring tong connectors (for grounding the regular lights), the Turn Signal Switch and the hardware to mount it to your steering column, the Flasher with mounting clamp, an in-line fuse holder, a 5 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This aftermarket turn signal kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
My customers have installed their kits on the Polaris Ranger 425 / TM / 500 / 700 / 800 / 900 / XP / HD / HO / Diesel / 6x6, (Razor) RZR / RZR 570 / RZRS / RZR4 / RZR 900 XP / RZR XP-4 900 and Crew models, the Yamaha Rhino, the Can-Am Commander and Maverick models, the Honda Big Red MUV, the Kawasaki Mule and Teryx models, and the Arctic Cat Prowler. This aftermarket turn signal kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: 2.65 amps with the four hazard lights on!
|
|
|
|
|
|
|
|
2 - Amber 4"x2" REG Bulb Lights
2 - Red 4"x2" REG Bulb Lights
1 - Turn Signal Switch w/hardware
|
|
1 - Regular Flasher
1 - ATC Fuse Holder
1 - ATC 5 Amp Fuse
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For more information:
EZ Turn Signal Kits
P. O. Box 1818
Glendale, AZ 85311-1818 US
E-mail: Cisco@LEDTSK.com
Glendale Office: (623) 435-1337
|
|
|
|
|
|
| |
